4" Wood lathe face plate with choice of bored or thread hole. See details below.

Description

Please read the entire listing first before purchasing.
This is a 4" diameter steel face plate with a cast iron hub for wood lathe spindles & similar applications.
Y
ou must send me a eBay message on what threaded hole you need before ordering.
Your choice of one plate with a reamed or threaded hole listed below.  If you need another size not listed contact me for ability.
5/8" diameter hole or up to 1" diameter.
3/4" diameter hole.
3/4" x 10 threads right hand.
3/4" x 10 threads left hand.
3/4" x 16 threads right hand.
3/4" x 16 threads left hand.
7/8" x 14 threads right hand.
7/8" x 14 threads left hand.
7/8" x 16
threads right hand.
7/8" x 16 threads left hand.
1" x 8 threads right hand.
1" x 8 threads left hand.
1" x 10 threads right hand.
1" x 10 threads left hand.
1" x 12 threads right hand as pictured above.
1" x 12 threads left hand.
1-1/8" x 12 threads left hand with round hub not pictured.
1-1/4" x 8 threads right hand with round hub not pictured
1-1/4" x 8 threads left hand with round hub not pictured
1-1/2" x 8 threads left hand with round hub not pictured.
Contact me questions & sizes not listed.
The hub has different lengths depending on size of hole.
The steel face plate is 1/4" thick & h
as a 3" diameter circle having 4 equally spaced screw mounting holes for mounting your wood to the plate.  These screw holes are .200" diameter & are c'sunk to 1/2" diameter.
The assembly is held
together
by (3) #10-24 socket flat head screws
You get all the parts in the last picture.
If you want to see the exact picture of what you are ordering you must request this before ordering.
Do not order if you are unsure of what you are ordering contact me for any questions.
I have smaller & larger wood lathe face plates, see my complete listings.
This will shipped in a priority small flat rate box & you normally receive it receive in 2-4 days.
Ships only to the USA
No returns