Riser Block kit or Height attachment Delta 14" Bandsaw w/1" round post Delta 894

Description

Generic riser block kit machined to fit the Delta 14" bandsaw with a 1" round guide post that inserts into either the round or hex upper guide bracket hexagon on the lower end. The guide post has a flat milled on one side for the height adjusting screw to bear on and to align the upper guide bracket. Increases resaw capacity from 6" to 12" resaw. Requires 105" long blades, (one included), See my other listing for the kit with hex post for saws with hex guide post hole in upper arm.
Reqires; An assistant, 15/16" wrench, 1-1/16" wrench. Rubber, lead or plastic mallet is
useful
Color may vary from that is picture. White, gray, black or other.
Includes:
-Cast iron riser block with Delta pattern dowel pins machined and inserted
-Longer 1" round post for guide
-Longer bolt
-Extended front blade guard
-Extended column blade guard
-105" blade
-Instructions are in photo section of this listing
Installation instructions are included in the picture section of this listing.
All shipments go to the paypal address at time of payment. If you want it shipped somewhere else you  must contact me before paying. No refunds given for shipments delivered to paypal address at time of payment unless we specifically agreed to ship to a different address BEFORE payment.
CRITICAL NOTE #1:
MEASURE YOUR
EXISTING
GUIDE POST BEFORE ORDERING! (see drawing part #50)
SOME USED 15/16" or 24mm and some 1" round, still others used the  7/8 hex.
I sell all those options so please buy the one you need.
CRUCIAL NOTICE #2: Exchange of the  1" or 7/8" hex post that comes with the kit for a 15/16 one after purchase and shipment is upon postpaid return of post shipped. Exchange of a 1'' or 7/8 hex for 7/8" hex or 1" is .  Please take the time to measure your post to ensure you buy what you need,
(see drawing part #50).
Expandable guide side guard may require filing to fit your particular model or if you mark any areas that interfere and return it I will machine it at no charge.
Canadian buyers accept responsibility for shipping  once item is accepted by US Postal service non-withstanding any Ebay or Palpay policies and by purchasing hereby waive any right to claims for damages or non-delivery.
See my listing;
#
151147655983 for the 15/16" round guide post riser kit
or   #
111143299381  for the 7/8" hex  guide post kit
Satisfied customers report on this hard to find item:"
shipped promptly.", "
Exactly as described, perfect condition on arrival! thanks!',
Excellent transaction. Thank you,
as described, packed well, fit the 30yr old Delta/Rockwell perfectly!
Great product. Works perfectly with my band saw.
See my other listings for Delta bandsaw parts:
-
See my other Delta Bandsaw parts like:
ball bearing guide upgrade ebay item #
151063016792
Riser block kit for 1" guide post  Item # 151086232442
Riser block kit for 7/8" Hex post Item # 111143299381
Rear trunnion item # 111019161635
Front trunnion Item # 111031968907
Front and rear trunnion set Item # 152830840894
Tires Item # 111172333649
Upper wheel tension slide Item # 151466487407
Hinge & shaft Ebay item 150975435851
Entire Tension assembly Ebay item 150906690327
Table alignment pin Item # 111184452081111184452081
Blade tension spring Item #111322075848
(2) pairs guide thrust bearings Item # 111322075848
Upper Wheel Bearings Item 150596190651
Older lower wheel bearings (Old Style) Item # 150665038145
Upper wheel bearings (Old Style) Item # 150665038145
Trunnion clamp shoe Item # 151893279403
Rebuild kit for Delta and other 14" Bandsaw ITEM: 150796168565
Delta 14" Bandsaw Upper wheel Shaft & Hinge assembly. Generic 14" ITEM:
150906690327
Riser Block kit for Delta 14" Bandsaw with hex post interchanges with Delta 894 ITEM
110989530162
*Buyer is responsible for custom charges from their country*
20% restocking fee on returns
All sales ship to address registered with Ebay at the time of the sale.
All sales ship to address registered with Ebay at the time of the sale.