-40%

USB 2.0 to Ethernet 10/100 RJ45 Network LAN Adapter for Windows 7/8/10/Vista/XP

$ 2.29

Availability: 289 in stock
  • Item must be returned within: 30 Days
  • Brand: Unbranded/Generic
  • Type: Adapter/Converter
  • Cable Length: 1/2 ft
  • Restocking Fee: No
  • Country/Region of Manufacture: China
  • MPN: #256
  • Return shipping will be paid by: Seller
  • Connector B: RJ45 Port Female
  • Features: Portable
  • USB Specification: USB 2.0
  • All returns accepted: Returns Accepted
  • Connection Split/Duplication: N/A
  • Refund will be given as: Money Back
  • Connector A: USB Standard Type A Male
  • Condition: New
  • Output Voltage: 5 V

    Description

    USB 2.0 to Ethernet 10/100 RJ45 Network LAN Adapter for Windows 7/8/10/Vista/XP
    Converts a USB 2.0 port to an RJ45 Ethernet jack
    Supports 10Mbps and 100Mbps auto-negotiation
    Compatible with Windows 10 and Linux
    Corechips SR9900 Chipset
    No need to download drivers. If the driver is not installed, then the device will show up as a CDROM drive from which you can install the drivers. Implements USB-CDC-ECM (CDC Ethernet support) which is supported on Linux without additional drivers.
    The SR9900 is a highly integrated, low-power, single-chip USB 2.0 to 10/100M Ethernet control IC. It integrates a USB 2.0 transceiverand a IEEE802.3 / IEEE802.3az-2010 10/100M Ethernet module. It is fully compatible with Microsoft's NDIS5 and NDIS6 (IPv4, IPv6, TCP, UDP) checksum features, supports IEEE802 IP2 layer priority coding, and IEEE802.1Q VLAN.
    Chipset Features:
    • Fast 10/100M Ethernet interface, supports USB full speed and high speed mode
    • Supports CDC-ECM
    • Network cable cross detection and automatic correction
    • Auto-negotiation function
    • Compatible with IEEE 802.3 10Base-T/100Base-TX/100Base-FX
    • Supports twisted pair exchange, polarity, phase offset correction
    • Supports full duplex IEEE 802.3x flow control and half duplex conflict pressure fallback flow control
    • Supports IEEE 802.1Q VLAN tag
    • Supports IEEE 802.3az-2010 (EEE) energy saving mode
    • Dynamic power management reduces no-load and light load power consumption
    • Supports Wake-on-LAN through network link status change, magic packet, and remote wakeup events
    • Working temperature: 0℃ to 70℃
    • Built-in TX/RX packet buffer
    • Built-in IPv4/IPv6 packet checksum bearer engine, supports IPv4 TCP/IP/UDP/ICMP/IGMP, IPv6 TCP/UDP/ICMPv6 packet verification generation and inspection
    • Supports Protocol Offloads (ARP and NS)
    While it should not be necessary to download drivers, they are available for download here:
    https://www.jacobsparts.com/images/drivers/SR9900.zip
    Fast shipping from USA